Solenoid

  
Solenoid is an easy to use actuator that provide strong holding force. We offer both open frame solenoid and tubular solenoid. Both Push and Pull types are provided.
 
  • Insulation grade: A (105 °C), wire A (105 °C)
  • Operating temp. range: -20 °C ~ + 40 °C
  • Dielectric strength: AC1200V 50/60Hz 1 minute
  • solation resistance: > 100M ohm 500 VDC
  • Life expectancy: 500,000 cycles or more
  • Standard Operating voltage option 6V-24V

    •  

    Solenoids are electromechanical components consisting of a wounded coil that are shaped around a freely moving steel or iron plunger. When the solenoid is connected to a voltage the current will generate a magnetic field which will apply a force on the plunger. The force direction will point to the centre of the solenoid.

    Open Frame Solenoid

     

    The solenoids plunger force is a linear function of the current through the coil but is also strongly depending on the distance of the center of the plunger and the center of the solenoids.

    A common method in operating solenoids is to apply it to a higher voltage in relation to its nominal voltage. The solenoids nominal voltage is the voltage upon which the solenoids can be applied continuously with out being over heated. By applying a higher voltage to the solenoids the force will also become higher but the operation time should be less than one minute depending on the voltage level and the duty cycle of the operation.

    You may refer to the Characteristic Table below to look for the suitable parts. In case you did not find any, please Contact Us for assistance.
    Typical Open Frame Solenoid Characteristic:
    Part No Rated Voltage
    (Volt)    		 Coil Power
    (W)    		 Holding Force (N) Stroke Length
    (mm)    		 Holding Force @ 50% Duty (N) Holding Force @ 25% Duty (N) Holding Force @ 10% Duty (N)   Weight
    (g)    		 Data
    sheet
    FS-0415-12
    		 12 0.8 0.1 1 0.25 0.55 1    
    FS-0421-12
    		 12 1.2 0.4 2 0.9 1.6 2.5    
    FS-0530-12
    		 12 1.8 0.8 4 2 2.6 4    
    FS-0630-12
    		 12 2.4 1.9 7 2.7 4 6.1    
    FS-0837-12
    		 12 3.8 4 9 6.5 9 13    
    FS-1040-12
    		 12 4.5 6 11 9 13 20    
    FS-1250-12 12 7.5 15 16 20 26 35    
    FS-1264-12
    		 12 8.0 15 20 18 24 30    
    FS-1650-24 24 12 30 15 45 50 60    
    FS-1578-12
    		 12 12.5 50 25 58 67 81    
    FS-1683-12
    		 12 15 45 30 55 65 85    

    		                   

    		                   
    Typical Tubuler Solenoid Characteristics
    Part No Rated Voltage
    (Volt)    		 Coil Power
    (W)    		 Holding Force (N) Stroke Length
    (mm)    		 Holding Force @ 50% Duty (N) Holding Force @ 25% Duty (N) Holding Force @ 10% Duty (N)   Weight
    (g)    		 Data
    sheet
    TS-1939-12
    		 12 7 6 10 9 12 17   82
    TS-2551-12
    		 12 10 20 15 25 30 35   178
    TS-3864-12
    		 12 17 32 20 40 50 64   497
    TS-70110-12
    		 12 30 100 50 160 220 -   2100